Kevlar Belt /Kevlar Roller Working Function in Aluminum Industry
1£® Heat Resisting Felt Roller
We have two kinds of heat resisting Felt Roller for choice:
1).500 C temperature resistance ,we take 100% Aramid (Dupont Fiber) Heat resistant fiber to produce .
Fiber introduction : Aramid (Dupont Fiber) fiber can resist instant 550 C ,longtime working with high temperature sections material(300 C ~500 C ) ,will not melt and pollute Sections Aluminum as Aramid (Dupont Fiber) Fiber is Thermo settings .
Specification Available :
Inside Diamter : 39mm ,48mm ,50mm ,54mm ,58mm ,60mm ,63mm ,68mm ,70mm
89mm,100mm ,102mm,110mm ,112mm ,115mm 130mm
Thickness : 3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm
2).Kevlar Felt ,480C temperature resistant ,70% Aramid (Dupont Fiber) Fiber blended with 30% carbon fiber to get Kevlar Felt ,carbon fiber is also Thermo Setting material will not melt and pollute sections Aluminum ,Kevlar Felt can resist instant 480C ,long time working in high temperature conditions ( 280 C ~500C) ,felt will be in weightlessness . 30% carbon fiber will take calorific conduction and save production cost .
Specification Available :
Inside Diameter : 39mm ,48mm ,50mm ,54mm ,58mm ,60mm ,63mm ,68mm ,70mm
89mm,100mm ,102mm,110mm ,112mm ,115mm 130mm
Thickness : 3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm
2.Heat Resisting Felt Belt
We have three kinds of heat resisting felt belt for choice :
1).480 C ~500 C Felt Belt
2).Nonporous Felt Blet 480 C ~500 C
3).Regular Surface conglutinate Felt Belt ,480C ~500 C .
3.Kevlar /P.B.O for much high temperature ,
We have 3+7 type ,P.B.O/Kevlar type
Also 2+8 Type .P.B.O/Kevlar Type .
¡¡
¡¡
Applications :
1. Applided in walking beam ,Felt Roller 100% Aramid (Dupont Fiber) .500 C . 12mm thickness .
2. Nonporous felt belt is composed with nonporous scrim and needle punched layer .different tons of extruder will take different belt ,
AA class : 3 layer of Aramid (Dupont Fiber) nonporous scrim ,tensile strength 35N/ mm ,are suitable for 2000tons extruder .
A Class : composed by 1 layer of Kevlar nonporous scrim ,3 layer high strength Polyester scrim .PE layer in the middle can only resist 200 C ,suitable for less then 2000 tons extruder