|Place of Origin:||China|
|Minimum Order Quantity:||300PCS|
|Packaging Details:||Poly bag or Paper cartons|
|Delivery Time:||25 days|
|Payment Terms:||T/T ,L/C|
|MATERIAL:||Aramid Felt 550 gsm||APPLICATION:||Lead Smelter Furnace,Metal smelting|
|TEMPERATURE:||High Temperature Filter Bag||BAG FILTER:||Aramid Nomex Filter Bag|
Nomex filter bags is the best choice for Asphalt mixing plant bag filter dust filtration.
Advantages of Aramid Filter bags :
1) Performs at high temperatures
Nomex Filter Bags can be used continuously at operating temperatures up to 218°C (425°F) . Nomex dust collector bags
2) Good abrasion Resistant
Flex resistance of Nomex filter bag at room temperature is good, about equal to that of polyester fibers; after aging at temperatures of 121°C (250°F) and above its toughness if excellent. Nomex filter bag should give more than three times the wear life of polyester filter bags at 121°C (250°F) and above.
3) Good chemical Resistant
Nomex filter bag work well in acid environment, The dust collector system should be warmed before putting on stream and dried before being shut down to minimize chemical attack.
5) Dimensional Stability is well for Nomex filter bag
6) High temperatures
The most effective use of Nomex filter bag ,aramid filter bag is in high temperature filtration systems where effluent temperature are above 190 C degree or in systems with surges over190 C degree. In hot gas filtration systems, Nomex filter bag require less filter area, for equal gas volume and efficiencies, than fiber glass.
Nomex filter bag for higher temperature dust filtration ,widely applied in Asphalt mixing plant ,metallurgy industry, metal refining, metal smelting furnace industrial smoke, cement Kiln smoke dust filtration in cement plant ,steel melting furnace smoke filtration and so on .
NOMEX filter bag offer one of the best total economies in a filtration system because of higher air to cloth ratios, higher temperature capability, and a long working life.
|Compositions||Nomex Meta Aramid Felt|
|Air permeability (m3/m2/min)||>17|
|Broken strength (Mpa /min)||≤20|
|Continuous working temperature (degree C)||180|
|Short time Working temperature (degree C)||240|
|The stability of water solution||Medial|
|Finishing treatment||Singeing, heat-setting, calendaring|
Contact Person: Miss. Doreen Zou
Tel: 0086 135 8806 5995